Home/ Questions/Q 188
Next
In Process

Skylights Roofing Forum Latest Questions

Paul McNeela
  • 1
  • 1
Asked: 2024-05-07T13:36:17+01:00 In:

How to install a frameless skylight?

  • 1
  • 1

I bought a frameless 1000 x 2000 mm triple glazed skylight. Do you recommend to use a foam rope for installation?

Share
Leave an answer

Leave an answer

Browse


4 Answers

  1. John Wareing
    Begginer

    Absolutely, using a foam rope for installing your triple-glazed 1000 x 2000 mm frameless skylight is highly recommended. It acts as a compressible buffer, filling any gaps between the skylight and the upstand, ensuring there’s no stress on the glass which can prevent potential cracking. Plus, it aids in creating a more airtight seal, enhancing the insulation properties of your skylight installation. It’s a simple addition that can significantly improve the durability and performance of your new skylight!

  2. blade

    Installing a frameless skylight involves careful planning and execution since it requires precise handling of materials and an understanding of structural integration with your building’s roof. Here’s a general guide to installing a frameless skylight:

    1. Planning and Preparation

    • Design and Location: Decide where the skylight will be installed. Consider factors like sun exposure, roof structure, and interior aesthetics.
    • Permits: Check with your local building authority to see if you need a permit for the installation.
    • Materials: Purchase a frameless skylight kit that fits your needs. These typically include the glass, mounting hardware, and sealants.
    • Tools Needed: Gather necessary tools such as drills, screws, sealant guns, levels, and safety equipment like gloves and goggles.

    2. Roof Preparation

    • Access the Roof: Ensure safe access to your roof using ladders or scaffolding.
    • Locate Rafters: Use a stud finder to locate rafters where the skylight will be mounted.
    • Cutting the Opening: Mark the dimensions of the skylight on the roof. Use a circular saw or reciprocating saw to cut through the roofing material and sheathing. Make sure the opening is clean and matches the dimensions needed for your skylight.

    3. Frame Installation

    • Install the Frame: If your skylight has any framing elements or a mounting kit, install these according to the manufacturer’s instructions. Ensure that the frame is level and securely fastened to the roof structure.
    • Waterproofing: Apply a waterproof membrane around the edges of the frame. This can include roofing tar, rubber membranes, or other recommended sealants to prevent water ingress.

    4. Placing the Glass

    • Mounting the Glass: Carefully lift the glass pane into place. This step often requires multiple people or special lifting equipment due to the weight and fragility of the glass.
    • Sealing: Secure the glass to the frame or directly to the roof, depending on the design of your skylight. Use high-quality sealants to ensure a watertight seal around all edges.
    • Inspecting the Seal: Check for any gaps and apply additional sealant as needed.

    5. Finishing Touches

    • Interior Finish: From the inside, ensure that the transition between the ceiling and the skylight is smooth and finished. You might need to patch or paint the interior drywall.
    • Clean Up: Remove any debris, dust, and tools from the roof and inside the house.

    6. Professional Inspection

    • Safety and Compliance Check: It is advisable to have a professional inspect the installation to ensure that it meets local building codes and is safely installed.

    Additional Tips:

    • Safety First: Always prioritize safety when working at heights. Use proper fall protection systems.
    • Professional Help: If you’re not experienced in construction or roofing, consider hiring a professional. Installing a skylight can be complex and requires precision to avoid leaks and ensure structural integrity.
  3. Barry Rimmer
    Begginer

    To install your 1000 x 2000 mm triple-glazed frameless skylight, start by ensuring you have all necessary safety equipment and tools like a tape measure, utility knife, drill, screws, and sealant. Measure and mark the roof for the skylight dimensions, then carefully cut the opening. Build a sturdy timber frame for the skylight and secure it within the opening.

    Next, install flashing around the frame to prevent water ingress. Position the skylight in the frame, ensuring it fits snugly and is level. Apply high-quality sealant around the edges of the skylight for a watertight seal.

    Using a foam rope is recommended. It helps fill gaps between the skylight and frame, ensuring a tight seal and improving insulation. Fasten the skylight according to the manufacturer’s instructions, then apply additional flashing and sealant as needed.

    Finally, inspect the installation thoroughly, checking for gaps, and test for leaks by spraying water over the skylight. By following these steps and using a foam rope, you’ll ensure a secure and watertight installation. If in doubt, consult a professional installer.

  4. Danny Taylor

    You maybe won’t get the guarantee if you don’t use it