Foam Rope – Structural Glazing Tape – 9mm Thick (7.5m Rolls)

£ 24.00 incl. VAT

17 People watching this product now!

Double-sided, high-adhesion PVC tape designed specifically for structural spacer systems in glazing applications. It features an open-cell construction that facilitates the complete curing of structural silicones from every angle, ensuring a strong and reliable bond. The tape is coated with a durable acrylic adhesive that allows for quick rebound from compression, maintaining its integrity and performance.

The product’s open-cell design has been rigorously tested according to ASTM E96-2005 standards for water vapor transmission, confirming its effective airflow structure. Additionally, it has undergone thorough testing and received approval from The Dow Chemical Company, attesting to its quality and suitability for structural glazing applications.

Description

DESCRIPTION

Double Sided high tack acrylic adhesive coated PVC structural spacer glazing tape. This tape is designed for use in structural spacer systems and has an open cell structure to allow the curing of structural silicones on all sides. Fast recovery from compression.

COLOUR

Black / Grey (by special order)

Tested to ASTM E96-2005 water vapour transmission to determine open cell airflow structure

GENERAL CHARACTERISTICS	VALUE	STANDARD
Density	300 kg/m³	—
Tensile Strength	500 kpa min	DIN 53571
Elongation	150% min	DIN 53571
Tear Strength	2.5 kg/cm min	DIN 53515
Compression Set	10% max.	DIN 53572
Final Recovery	90-98%	DIN 53572

Force to compress by 5% (to retain air permeability) 40N/CM²

Water Absorption 8% by volume

Cold Flexure -30°C pass 6 mm Madril

Temperature Resistance -50°C to +60°C BS 2571

Thermal conductivity 0.19w/(m. K) or 0.16 kcal

Shore Hardness	75-85	Shore 00 , 35 Shore A
Resistance to Ageing	Excellent
Resistance to Chemicals: –
Acid	Good
Mineral Oil	Good
Alcohol	Good
Alkalis	Good
Petrol	Good
Soap & Detergents	Good
Compression required to achieve a
Positive waterseal	10%

ADHESIVE SPECIFICATION CONSTRUCTION	: TYPE	OPEN FACE
Adhesive Pure high tack Acrylic 70 gsm
TEST Adhesive strength	1 minute		21N/25mm
(FINAT TM 1-adhesion	20 minutes		23N/25mm
of polyester 50 um against stainless steel	24 hours		25N/25mm

1 kg Static Shear, 25 mm x 25 mm 33 hrs

Release 15 N/m

Temperature Range -20°C to +90°C

ADHESIVE SPECIFICATION : CLOSED FACE

CONSTRUCTION TYPE

Adhesive Pure high tack Acrylic 50 gsm

TECHNICAL DATA

Carrier : None

Release Liner : Filmic Liner: 150 mic at sizes up to 8mm, 80 mic at 9.5mm and 12mm

Adhesive : Pure acrylic

Adhesive strength 1 minute 14N/25mm

(FINAT TM 1-adhesion 20 minutes 16N/25mm

of polyester 50 um against 24 hours 21 N/ 25mm stainless steel)

Resistance to chemicals When correctly applied, resistant against most

solvents, mineral oils, fuels, aliphatic solvents, dilute acids, salts and alkalis.

Application temperature >15°C

Shelf life 1 year

(at 20°C and 50% relative humidity)

Flammability

This product is made up from PVC foam coated on both sides with an adhesive. It has not been tested for flammability but can be considered self- extinguishing due to the nature of the components. However, it should be noted that any smoke created would be highly toxic and would emit Hydrogen Cyanide gas during and after burning.

NOTE

All Technical data is based on average values. By nature of its manufacture, all foam specifications can vary by 10%. Statements, technical information and recommendations contained herein are based on tests we believe to be reliable. The user shall determine the suitability of the product for his/her intended use and the User assumes all risk and liability whatsoever in connection herewith.

Products are manufactured to rigid standards of quality.

To date no known failures have occurred due to the premature ageing of this product.